Vibratory Disc Mill – TT-VDM is mainly used for sample preparation for spectral analysis. The device is especially suitable for fast fine grinding without loss and samples with fineness for analysis can be prepared by using it. No matter the materials are medium hard, hard, brittle or fibrous the vibrating cup type grinder can perform sample preparation treatment in dry conditions (namely dry grinding). There are five kinds of kits for grinding: hardened steel, tungsten carbide, agate, zirconium oxide and high manganese steel, which can meet your extensive and wide applications.
- Ceramics and Glass
Oxide ceramics, Glass
- Building Materials
Ash cement, Stone, Concrete
- Environmental Area
Soil, Paving stone, Slag
- Minerals and Metallurgy
Coal, Cake, Corundum, Ore, Slag
TT-VDM Vibratory Disc Mill crush sample via pressure, impact and friction. The rapid compressing device makes the grinding kits firmly attached onto the vibrating chassis. Through transmission, the vibrating chassis will generate drastic 3D vibrating mode so as to make giant impacting force, frictional force and grinding force between the grinding kits, and such forces focus on samples to make them become powder in a very short time.
- Compact floor type design saves space
- Small final fineness size (d95< 75µm)
- Safe and rapid pneumatic fastening device
- Grinding kits made of five different kinds of materials are available for selection
- Grinding cups of five kinds of volumes can be equipped; one to three samples can be processed for each batch
- Large sample processing capacity, 1.8kg per time
- The design of safety protection lock can guarantee safe protection
- Unique auxiliary assistance device facilitates the movement of grinding cups
- Strong power motor 2.2 KW and the grinding efficiency is 30% higher than that of similar products
- Extremely short grinding time
- Speed adjustable 700-1500rpm, continuous
- The final fineness (d95 < 40µm)
- Quick-action grinding set clamping device
|Application||Comminuting, Mixing, Triturating|
|Feed Material||Medium-hard, Hard, Brittle, Fibrous|
|Maximum Feed Size||25mm||15mm|
|Number of sample||1 , 3||1|
|Volume of the grinding set||500ml, 800ml, 1000ml, 2000ml||50ml,100ml,250ml|
|Grinding set material||Hardened steel, Tungsten carbide (only 500ml and 800ml), Agate, Zirconium oxide, High manganese steel||Hardened steel, Tungsten carbide (50ml, 100ml and 250ml), Agate (speed 700rpm), Zirconium oxide|
|Speed||910 rpm||700-1500 rpm , continuous|
|Power Supply||3Ph, 380V, 50/60Hz|
- Grinding Sets
For various applications, we can supply different material of grinding set. Please choose the suitable material depending upon your requirement.
- Hardened Steel
The biggest characteristic of this material is resistant corrosion, rust prevention. For processing corrosive sample, the material grinding suite is a good choice.
- Tungsten Carbide
This material have high-level hardness same as of diamond. It is suitable for processing high hardness sample. It is available in the volumes of 500ml and 800ml.
This material is heavy-metal free contamination, can guarantee the grinding purity. Suitable for processing soil and some medium-hard sample. It is a good choice for getting a high grinding purity.
- Zirconium Oxide
It is free of heavy metals and can therefore be used for sample preparation to heavy metal analysis. For example, further areas of application are biology, preparation of plant and animal tissue, as well as human medicine, where any kind of contamination can be hazardous.
- High Manganese Steel
This material is suitable for processing samples of popularization of non-corrosive, hardness is not high, due to its low cost, so there is high demand of this material grinding suite. If your purity of the sample request is not high, you can consider the material grinding suite.
There are five kinds of materials of grinding sets for selection, agate recognition for automatic speed reduction, unique clamping lock device, grinding chamber completely closed sound insulation design.