TT-PIT Universal Charpy/ Izod Analog Impact Tester
ASTM D256, ASTM D6110, ISO179, ISO180, ISO13802
The TT-PIT Basic Izod Impact Tester determines the energy required to break standard plastics impact specimens.
Meeting the corresponding ASTM, & ISO test methods, this equipment is equipped with both Izod and Charpy Vise and made according their respective standards. Users can read the endurance of impact strength directly from the scale.
The TT-PIT is a universal mechanical units designed for simple impact energy scale and an easy to read analog display.
For notching impact specimens you can use the optional TT-Notch unit for accurate and reliable notches. TT-Notch has two depth verification gauges and speed adjustor. Combined together with the TT-Notch, the TT-PIT is the most cost-effective way for Charpy/Izod impact testing.
|Model||TT-PIT-12J Universal Impact Tester||TT-PIT-21J Universal Impact Tester|
|Test type||IZOD &CHARPY|
|Start impact Angle||150°|
|IZOD||– Radius of striker edge 0.8 mm|
– Grip border distance strike point 22 mm
– Impact velocity：3.47 m/sec
|– Radius of striker edge 3.175 mm|
– Radius of curvature of supports 3.175 mm
|– Radius of striker edge 2 mm|
– Radius of curvature of supports
|Test Capacity||1J or 2.75J or 11J ( To be chosen as required)||1J or 2.75J or 5.5J or 11J or 22J or|
25J ( To be chosen as required)
|Best accurate range: 20~80% of the full capacity.|
|Feature||Large Displayer: Easy to read the impact energy directly.|
|Optional||TT-Notch Impact Specimen V-Notcher – ASTM D256 ISO 180|
|Dimension||77 × 30 × 90 cm||77 × 38 × 90 cm|
|Weight||90 kg||160 kg|
TT-Notch Impact Specimen V-Notcher
ASTM D256 ISO 180
Impact Specimen Angle Cutting Device. This machine can cut various depth V shape according to different standard.
To produce IZOD and CHARPY specimens, need to cut a V angle on the middle of specimen to less the diversity. The cutting speed of this tester can be adjusted according to the material of specimen, also according to the different angle depth, can adjust or change the shape of cutting tool to produce different angle cut.
|Cutting through angle||45°(or specified)|
|Cutting Radius||R0.25(or Specified)|
|Specimen Length||140mm (MAX)|
|Specimen Dimension||3X10~13X13mm(Thickness X Height)|
|Power||110V/60 Hz or 220V/50 Hz, 3A, Single Phase|
|Dimension||48 X 37 X 36(h)cm|