QC-50 CALIBRATION GAS BUMP TESTER
27 ianuarie 2017
PORTA GAS
28 ianuarie 2017
Show all

QC-100 CALIBRATION GAS BUMP TESTER

Caracteristici:

  • GASES SUPPORTED: NH3, C6H14, C7H8
  • Internal pump provides continuous flow.
  • Adjustable output.
Categorie:
  • Internal pump provides continuous flow.
  • Adjustable output.

Stable, Safe, Reliable – The QC-100 from Advanced Calibration Designs provides a quick and easy method of checking the performance of gas detection systems.

Revolutionary – The QC-100 utilizes revolutionary technology allowing a calibration functional check or ‘bump test; as needed. The unique QuickCheck Vials (QCV) utilize a stable, safe and reliable delivery method allowing ease of shipment, storage and use. The QC-100 is currently available for ammonia and hydrogen chloride as well as PPM ranges of hexane and toluene.

Simple – The QCV used in the QC-100 are small, disposable vials with a small amount of the gas to be tested in liquid form in a sealed inner ampoule. Breaking the inner ampoule allows the liquid to absorb into a filter which then diffuses out the gas. The motorized pump in the QC-100 provides a continuous output of calibration check gas, and the needle-valve allows users to adjust the amount of gas being generated. This gas concentration can be checked against a calibrated instrument for higher accuracy, or simply used as a bump test device.

Air Flow Rate:0.5 to 1.0 LPM
Useful Vial Life:Approx. 8 hours
Vial Warranty:One Year
Dimensions:15.2cm x 5.8 cm x 0.9 cm
Weight:220g
Relative Humidity (non-condensing):0 – 100%
Operating Temperature:5°C – 50°C
Battery Power:2 alkaline “AA”