Impact Testing Ultra Low Test Chamber
31 octombrie 2016
Optical Fiber Cable Impact Tester
1 noiembrie 2016
Show all

Optical Fiber Cable Repeated Bending Tester

Specificatii tehnice

Model & SpecificationTT-OFB-Series
Bending angle±90°
Max. bending cycles1-9999 cycles
Frequency range10 – 30 cycles / min
Bending radius25,50,75,100,150,500 (mm)  — (others upon request)
Mass of weights for applying tensionWeight structure 27.5 Kg,

3 pieces of 5Kg weight increment,

1 piece of 2.5Kg weight increment

Working frame dimensions (L*W*H)

(Including protective cage)

3000*720*2500 (mm)
Control console dimensions (L*W*H)400*300*800 (mm)
Power1 KW

(Please specify voltage and frequency before placing the order)

 

IEC 60794-1-2-E11

Optical Fiber Cable Repeated Bending Testing Machine is used to determine the ability of a fiber optic cable to withstand repeated bending (cyclic flexing).

Optical Fiber Cable Impact Testing Machine TT-OFB Series allows a cable sample to be bent backwards and forwards at an angle of 180°, while the sample is subjected to a tensile load.

The bending arm is designed to hold the cable securely during the entire test, without crushing the optical fibers or inducing optical loss. The bending radius is controlled by replaceable cushioning reels, chosen to match the cable bending radius. The machine is capable of cycling at a rate of 30 cycles per minute.

Standard Procedure:

A cable sample is secured to the bending arm while in an upright position. A predetermined weight is attached to the bottom of the cable sample. The motor is turned on and the arm oscillates between the two extreme positions flexing the cable. The number of flexing cycles depends on the cable design.

Technical Specifications

Model & SpecificationTT-OFB-Series
Bending angle±90°
Max. bending cycles1-9999 cycles
Frequency range10 – 30 cycles / min
Bending radius25,50,75,100,150,500 (mm)  — (others upon request)
Mass of weights for applying tensionWeight structure 27.5 Kg,

3 pieces of 5Kg weight increment,

1 piece of 2.5Kg weight increment

Working frame dimensions (L*W*H)

(Including protective cage)

3000*720*2500 (mm)
Control console dimensions (L*W*H)400*300*800 (mm)
Power1 KW

(Please specify voltage and frequency before placing the order)