I-Raman
15 decembrie 2016
I-Raman Pro
15 decembrie 2016
Show all

I-Raman Plus

Caracteristici:

  • SENSITIVE:

High quantum efficiency CCD array detector with deeper cooling and high dynamic range

  • COMPREHENSIVE:

Our comprehensive package of sampling accessories for measuring solid and liquid samples provide you the utmost utility right out of the box.

  • QUANTITATIVE:

Our state of the art BWIQ® Raman data analysis software package provides an intuitive user interface, intelligent algorithms, and efficient matrix calculation power, making it easy to use by both expert and novice users to develop quantitative and qualitative chemometric models.

  • Additional Features:

Patented CleanLaze® Technology for Laser Stabilization
Rayleigh line cut-off at 150 cm-1 (65 cm-1 Option Available)
Fiber Optic Coupling for Convenient Sampling
532nm and 785nm Excitation Configurations Available

Categorie:

The i-Raman® Plus is part of our award winning line of i-Raman portable Raman spectrometers powered by our innovative smart spectrometer technology. Using a high quantum efficiency CCD array detector with deeper cooling and high dynamic range, this portable Raman spectrometer delivers an improved signal to noise ratio for up to 30 minutes, making it possible to measure weak Raman signals. The i-Raman Plus features the unique combination of wide spectral coverage and high resolution with configurations measuring from 65 cm-1 to up to 4200 cm-1, enabling you to measure stretching bands around 3100 cm-1. The system’s small footprint, lightweight design, and low power consumption provide research grade Raman capabilities anywhere. The i-Raman Plus comes standard with a fiber optic probe, and can be used with a cuvette holder, a video microscope, an XYZ positioning stage probe holder and our proprietary BWIQ® multivariate analysis software and BWID® identification software. With the i-Raman Plus, a high precision qualitative and quantitative Raman solution is at your fingertips.

Applications:

  • Art & Archaeology
  • Bioscience and Medical Diagnosis
  • Polymers and Chemical Processes
  • Semiconductor & Solar Industry
  • Geology and Mineralogy
  • Pharmaceutical Industry
  • Environmental Science
  • Raman Microscopy
  • Forensic Analysis
  • Gemology
  • Teaching
  • Quality Control
  • General Research

SENSITIVE:

High quantum efficiency CCD array detector with deeper cooling and high dynamic range

COMPREHENSIVE:

Our comprehensive package of sampling accessories for measuring solid and liquid samples provide you the utmost utility right out of the box.

QUANTITATIVE:

Our state of the art BWIQ® Raman data analysis software package provides an intuitive user interface, intelligent algorithms, and efficient matrix calculation power, making it easy to use by both expert and novice users to develop quantitative and qualitative chemometric models.

Additional Features:

Patented CleanLaze® Technology for Laser Stabilization
Rayleigh line cut-off at 150 cm-1 (65 cm-1 Option Available)
Fiber Optic Coupling for Convenient Sampling
532nm and 785nm Excitation Configurations Available

Lasers
532nm Excitation>40mw at laser port (50mW max)
785nm Excitation>320 mW at laser port (420 mW Max)
Laser Power Control0 to 100%
SpectrometerRangeResolution*
BWS465-532S150 – 4200cm-1~ 4.5 cm-1 @ 614 nm
BWS465-532H150 – 3400cm-1~ 3.5 cm-1 @ 614 nm
BWS465-785S150 – 3350cm-1~ 4.5cm-1 @ 912nm
BWS465-785H150 – 2800cm-1~ 3.5cm-1 @ 912nm
Detector
Detector TypeHigh quantum efficiency CCD Array
Pixel Number2048 Effective Detector Elements
Effective Pixel Size14μm x ~ 0.9 mm
CCD Cooling Temperature-2°C
Dynamic Range50,000:1 (Typical)
Digitization Resolution16-bit or 65,535:1
Integration Time100ms – 30 mins
Electronics
Computer InterfaceUSB 3.0 / 2.0
TriggerYes (Compatible with B&W Tek Probes)
Power Options
DC Power Adaptor12V DC @ 6.6 Amps
BatteryOptional
Physical
Dimensions6.7in x 13.1in x 9.5in (16.9cm x 33.3cm x 24.2cm)
Weight~11.0lbs (~5.0kg)
Operating Temperature0°C – 35°C
Storage Temperature-10°C – 60°C
Humidity10% – 85%
*Typical Resolution Measured Using Pen Lamp Emission

Laser

Creating Raman Scatter
In Raman spectroscopy, it is essential to utilize a clean, narrow bandwidth laser due to the fact that the quality of the Raman peaks are directly affected by the sharpness and stability of the delivered light source. The i-Raman®spectrometer system features a patented CleanLaze®technology with a linewidth < 0.3nm when equipped with our 785nm laser. This technology results in the correct center wavelength and avoids the phenomenon of “mode hopping.” In addition, the laser output power can be adjusted in the software from 0 – 100%, allowing you to maximize the signal-to-noise ratio and minimize integration time.


Laser lifetime of 10,000 hours ensures quality data for years to come!

Filter

Collects Data within 175cm-1 of the Rayleigh Line
The center wavelength of the laser line is precisely maintained even when the peak power is increased by utilizing a series of high end filters. A laser line filter is used to clean up any side bands and ensure a narrow excitation is delivered to the sample by removing all secondary excitation lines before exciting the sample. The light collected from the sample is then filtered via a notch filter. Finally, an ultra steep long pass filter further removes lingering laser lines to allow accurate measurement of Raman peaks as close as 175 cm-1 from the Rayleigh line. An E-grade filter upgrade is available, allowing the measurement of Raman peaks as close as 65 cm-1 from the Rayleigh line.

Spectrometer

Optimized for Raman Spectroscopy
The spectrometer design in the i-Raman is dedicated for Raman applications. You can customize your spectrometer by choosing from a variety of excitation wavelengths. In addition, each configuration can be further customized for your individual detection needs. Choose from wider spectral range or high resolution optimized systems. Research grade spectral resolution of 3 cm-1 can be achieved with our double pass transmission optics. Most Raman applications do not require such tight resolution, so a wider spectral range would be the better choice in that case. The high-throughput optical layout of all i-Raman configurations are ideal for those low-light level Raman applications.

Probe

Easy Transition Between Sample Types
The probe allows for measurement of various materials in the form of liquids, gels, powders, or solids under both lab conditions (lab grade) or demanding environmental conditions (industrial grade). Constructed with state-of-the-art telecom packaging techniques, the probe has a flexible fiber coupling encased in a durable protective jacketing material which delivers Rayleigh scatter rejection as high as 10 photons per billion. Wavelength excitation probes come in 532nm and 785nm.

Software

B&W Tek offers comprehensive software packages that provide solutions for Raman application needs. Powerful calculations, easy data management, and user friendly, easy-to-follow work flow are all at the tips of your fingers.

BWSpec® is the foundation for all B&W Tek software platforms and comes standard with every Raman spectrometer. Built on the proven BWSpec platform, BWID® (optional) is optimized for identification and verification of materials. For industrial Raman applications that require federal compliance: BWID™- Pharma supports all requirements for FDA 21 CFR Part 11 Compliance.

The most recent addition to B&W Tek’s software portfolio is BWIQ® chemometrics software for use with the i-Raman® Plus and other high resolution Raman products. BWIQ™ is a multivariate analysis software package which can analyze spectral data and discover internal relationships between spectra and response data or spectra and sample classes. By coupling new and transitional chemometric methods with cutting edge computer science technology such as sparse linear algebra algorithms, BWIQ represents the next generation in speed, accuracy, and performance.