Exemplar PRO
15 decembrie 2016
Sol 1.7
15 decembrie 2016
Show all

Glacier X

Caracteristici:

  • UV – NIR ranges
  • <0.2nm resolution
  • TE cooled / regulated
  • 16-bit digitizer
  • 500 kHz readout speed
  • Plug-and-play USB 2.0
  • OEM version available
Categorie:

The Glacier X is the smallest TE cooled spectrometer on the market, making it the perfect solution for applications that require high performance and portability.  It is equipped with a 2048 element linear CCD array, built-in 16-bit digitizer, and high-speed USB 2.0 interface.

Compared to non-cooled CCD spectrometers, the Glacier X miniature spectrometer offers higher dynamic range, significantly reduced dark counts, and superior baseline stability, making it the ideal spectrometer for low light level detection and long-term monitoring applications.  Wavelength configurations are available from as low as 200nm to as high as 1050nm with resolutions between 0.2nm and 4.0nm.

Custom spectrometer configurations and advanced application support are available for OEM customers.  The combined temperature cooling and regulation, together with its compact form factor makes the Glacier TE Cooled spectrometer a favorite choice of OEM system integrators. The TE cooling makes it possible for weak signals, such as fluorescence and Raman, to be integrated for sufficient time to accumulate measurable signals for detection, resulting in a far superior signal-to-noise ratio.

Applications:

  • UV, Vis, and NIR: Spectroscopy / Spectroradiometry / Spectrophotometry
  • Wavelength Identification
  • Absorbance
  • Reflectance
  • OEM optical instrumentation component
  • UV – NIR ranges
  • <0.2nm resolution
  • TE cooled / regulated
  • 16-bit digitizer
  • 500 kHz readout speed
  • Plug-and-play USB 2.0
  • OEM version available
  • DC Power Input5V DC @ < 1.5 Amps
    AC Adapter Input100 – 240VAC 50/60 Hz, 0.5A @ 120VAC
    Detector TypeResponse Enhanced Linear CCD Array
    Pixels2048 x 1 Elements @ 14μm x 200μm Per Element
    Spectrograph f/#3.2
    Spectrograph Optical LayoutCrossed Czerny-Turner
    Dynamic Range300 (Typical)
    Digitizer Resolution16-bit or 65,535:1
    Readout Speed500 kHz
    Data Transfer SpeedUp to 180 Spectra Per Second Via USB 2.0
    Integration Time5 ~ 65,535ms x Multiplier
    External TriggerAux Port
    Operating Temperature15°C – 35°C
    Operational Relative Humidity85% Noncondensing
    TE Cooling14°C
    Weight~ 1.32 lbs (0.60 kg)
    Dimensions5in x 1.5in x 3.6in (127.0mm x 39.0mm x 90.7mm)
    Computer InterfaceUSB 2.0 / 1.1
    Operating SystemsWindows: 7, 8, 8.1 (32-bit & 64-bit)

  • 1. Fiber Coupler

    Secures Fiber to Ensure Repeatable Results
    By coupling a fiber optic to the SMA 905 adaptor, light will be guided to the slit and optically matched, ensuring reproducibility. For free space sampling, a diffuser or lens assembly can be connected directly to the SMA 905 adaptor.

    2. Entrance Slit

    Determines Photon Flux and Spectral Resolution
    Light entering into a spectrometer’s optical bench is vignetted by a pre-mounted and aligned slit. This ultimately determines the spectral resolution and throughput of the spectrometer after grating selection. We offer a variety of slit widths to match your specific application needs: from 10μm – 200μm wide, with custom slits available.

    3. Collimating Mirror

    Collimates and Redirects Light Towards Grating
    Both mirrors are f/# matched focusing mirrors coated with AlMg2, which produces approximately 95% reflectance when working in the UV-Vis spectrum. Aluminum (Al) provides reflectance and magnesium (Mg2) protects the aluminum from oxidation.

    4. Diffraction Grating

    Diffracts Light, Separating Spectral Components
    The groove frequency of the grating determines two key aspects of the spectrometer’s performance: the wavelength coverage and the spectral resolution. When the groove frequency is increased, the instrument will achieve higher resolution, but the wavelength coverage will decrease. Inversely, decreasing the groove frequency increases wavelength coverage at the cost of spectral resolution. The blaze angle or blaze wavelength of the grating is also a key parameter in optimizing the spectrometer’s performance. The blaze angle determines the maximum efficiency that the grating will have in a specific wavelength region.

    5. Focusing Mirror

    Refocuses Dispersed Light onto Detector
    Both mirrors are f/# matched focusing mirrors coated with AlMg2, which produces approximately 95% reflectance when working in the UV-Vis spectrum. Aluminum (Al) provides reflectance and magnesium (Mg2) protects the aluminum from oxidation.

    6. Array Detector

    Measures Entire Spectrum Simultaneously
    The Glacier® X features a 2048 x 1 linear TE Cooled CCD array detector with a 14μm pixel width and > 2000 active pixels. As the incident light strikes the individual pixels across the CCD, each pixel represents a portion of the spectrum that the electronics can then translate and display with a given intensity using BWSpec™ software.
    The quantum efficiency (QE) and noise level of the array detector greatly influences the spectrometer’s sensitivity, dynamic range and signal-to-noise ratio. The spectral acquisition speed of the spectrometer is mainly determined by the detector response over a wavelength region.

    7. Thermoelectric Cooler

    Reduces Dark Noise and Increases Detection Limits
    Cooling an array detector with a built-in thermoelectric cooler (TEC) is an effective way to reduce dark current and noise, as well as to enhance the dynamic range and detection limit.
    When the CCD detector array is cooled from a room temperature of 25°C down to 14°C by the TEC, the dark current is reduced by a factor of 4 and the dark noise is reduced by a factor of 2. This allows the spectrometer to operate at longer exposure times and to detect weaker optical signals.