Regulators
28 ianuarie 2017
MP 2000 SIRCAL
28 ianuarie 2017
Show all

Disposable HC mixes

Caracteristici:

  • Responsgas™ enables users of portable gas detectors to increase safety further by self- test function of the sensors with RESPONSGAS™, regardless of the make of gas.
  • This is both economical and simple, it takes a few seconds and requires no access to electricity, batteries or similar.
  • Above all, the handy size makes it a tool in your pocket or toolbox. Let the user feel safe, rather than just have the central test stations that may not be used as frequently, or are not accessible when needed.
  • Responsgas™ should not be confused with calibration gases.
  • Responsgas™ Ideal for use in the installation of stationary gas detectors
  • Connections customized for different types of detectors.
Categorie:

Responsgas™ enables users of portable gas detectors to increase safety further by self- test function of the sensors with RESPONSGAS™, regardless of the make of gas.

This is both economical and simple, it takes a few seconds and requires no access to electricity, batteries or similar.

Above all, the handy size makes it a tool in your pocket or toolbox. Let the user feel safe, rather than just have the central test stations that may not be used as frequently, or are not accessible when needed.

Responsgas™ should not be confused with calibration gases.

Responsgas™ Ideal for use in the installation of stationary gas detectors

Connections customized for different types of detectors.

Art No:RespQ-1
RespQ-2
Content:15%vol O2, Oxygen (up to) 2,5%vol CH4, Methane  200ppm CO, Carbon monoxide  50ppm H2S, Hydrogen Sulfide  Balans N2, Nitrogen
Test of Sensors:H2S, CO, O2, Div %LEL, CH4
Size:RespQ-1 – 150 x 35 mm, 0,8 liter gas, 150 ml
RespQ-2 – 205 x 45 mm, 1,6 liter gas, 300 ml
Pressure:9 bar
Matrl:Aluminum

Nozzle A “Single gas/fixed”

Check that the Responsgas is correct for just your sensor.
Make sure that your gas monitor is in detection mode or in Bump test mode if that can be used.
Take the lid of and use this as a cap over the sensor.
Place the spray nozzle in the hole on top of the lid and apply as little gas as possible.
Or apply direct towards the sensor. This can result in larger gas consumption.
Wait for the detector to respond and make sure that your alarm is triggered.
The gas will last for more than 20 response test. Check the marking on top of the can to keep track on how many tests that has been done. And you will know how many more tests that can be done.

Nozzle B “Multi gas/fixed with cal cap”

Check that the Responsgas is correct for just your sensor.
Make sure that your gas monitor is in detection mode or in Bump test mode if that can be used.
Use the calibration cap for the gas monitor.
Apply as little gas as possible.
Or apply direct towards the sensor. This can result in larger gas consumption.
Wait for the detector to respond and make sure that your alarm is triggered.
The gas will last for more than 20 response test. Check the marking on top of the can to keep track on how many tests that has been done. And you will know how many more tests that can be done.

Nozzle C ”Pumped monitors”

Check that the Responsgas is correct for just your sensor.
Make sure that your gas monitor is in detection mode or in Bump test mode if that can be used.
Use the pipe and place this just at the intake for the pump.
Apply as little gas as possible.
Wait for the detector to respond and make sure that your alarm is triggered.
The gas will last for more than 20 response test. Check the marking on top of the can to keep track on how many tests that has been done. And you will know how many more tests that can be done.